Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"
Number of items at this level: 95.
McDougall, John, Kelly, Darren and Barreto, Daniel (2013) Particle loss and volume change on dissolution: experimental results and analysis of particle size and amount effects. Acta Geotechnica.
Tsechelidou, Eleni (2013) Investigating gaps in higher civil engineering education regarding students’ level of knowledge and understanding of basic structural concepts. MPhil thesis, Edinburgh Napier University.
Shire, Thomas, O'Sullivan, Catherine, Barreto, Daniel and Gaudray, G (2013) Quantifying stress-induced anisotropy using inter-void constrictions. Geotechnique, 63 (1). pp. 85-91. ISSN 0016 8505
Hernandez, Zurine (2012) Conditions required for spinning continuous fibres from cellulose nano-fibrils. PhD thesis, Faculty of Engineering.
Barreto, Daniel and O'Sullivan, Catherine (2012) The influence of inter-particle friction and the intermediate stress ratio on soil response under generalised stress conditions. Granular Matter, 14 (4). pp. 505-521. ISSN 1434-5021
Boyles, Matthew (2012) The toxicity and potential pathogenicity of high-performance engineered multi-walled carbon nanotubes. PhD thesis, Edinburgh Napier University.
Jabir, Saad A A (2011) Thick film electronic ceramic sensors for civil structures health monitoring. PhD thesis, Edinburgh Napier University.
McGregor, Iain, Larsson, Pontus and Turner, Phil (2011) Evaluating a vehicle auditory display: comparing a designer's expectations with listeners' experiences. In: 29th conference of the European Association of Cognitive Ergonomics, 24-26 August 2011, Rostock, Germany. (Unpublished)
Reynolds, Timothy N (2010) Variables affecting the stiffness and distortion of Sitka spruce. PhD thesis, Edinburgh Napier University.
Waugh, William (2010) Development of a new manufacturing method of electrodes for solid oxide fuel cells. PhD thesis, Edinburgh Napier University.
Weckendorf, Jan (2009) Dynamic response of structural timber flooring systems. PhD thesis, Edinburgh Napier University.
Abukersh, Salem Ahmed (2009) High quality recycled aggregate concrete. PhD thesis, Edinburgh Napier University.
Ridley-Ellis, Daniel, Moore, John, Lyon, Andrew, Searles, Gregory and Gardiner, Barry A (2009) Strategic Integrated Research in Timber: Getting the most out of the UK's timber resource. 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009). ISSN 978-1-86197-179-1
Reichert, Thomas (2009) DEVELOPMENT OF 3D LATTICE MODELS FOR PREDICTING NONLINEAR TIMBER JOINT BEHAVIOUR. PhD thesis, Edinburgh Napier University.
Ridley-Ellis, Daniel, Moore, John and Khokhar, Aamir Muhammad (2009) Random acts of elasticity: MoE, G and EN408. In: WG meetings COST Action E53 "Quality Control for Wood and Wood Products" and Wood Drying Seminar in Bled, Slovenia, 23rd April 2009, Bled, Slovenia.
Garnier, Celine (2009) PERFORMANCE MEASUREMENT AND MATHEMATICAL MODELLING OF INTEGRATED SOLAR WATER HEATERS. PhD thesis, Edinburgh Napier University.
Barreto, Daniel, O'Sullivan, Catherine and Zdravkovic, L (2009) Quantifying the evolution of soil fabric under different stress paths. In: POWDERS AND GRAINS 2009: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON MICROMECHANICS OF GRANULAR MEDIA. American Institute of Physics, pp. 181-184. ISBN 978-0-7354-0682-7
O'Sullivan, Catherine, Cui, L and Barreto, Daniel (2009) Radial periodic boundaries for axi-symmetric DEM simulations: development, implementation and validation. In: International Conference on Particle-Based Methods: Particles, 25-27 November 2009, Barcelona, Spain.
Hill, Callum (2009) Why does acetylation protect wood from microbiological attack? Wood Material Science and Engineering, 4 (1-2). pp. 37-45. ISSN 1748-0272
Hill, Callum, Curling, Simon, Kwon, Jin H and Marty, Virginie (2009) A study of the decay resistance of a range of anhydride modified hardwood and softwood species exposed to the brown rot fungus Coniophora puteana. Holzforschung, 63 (5). pp. 619-625. ISSN 0018-3830
Zaihan, Jalaludin, Hill, Callum, Curling, Simon, Hashim, W S and Hamdan, Hussein (2008) Moisture adsorption isotherms of Acacia Mangium and Endospermum Malaccense using dynamic vapour sorption. Journal of Tropical Forest Science, 21 (3). pp. 277-285. ISSN 0128-1283
Ridley-Ellis, Daniel, Moore, John and Lyon, Andrew (2008) Strength grading and the end user – lessons from the SIRT project at Napier University. In: Conference COST Action E53 “End user’s needs for wood material and products” , 29th - 30th October 2008, Delft, Netherlands.
Reichert, Thomas and Ridley-Ellis, Daniel (2008) 3D lattice model for post-yield and fracture behaviour of timber. Proceedings of the 10th World Conference on Timber Engineering, Miyazaki 2008.
Moore, John, Lyon, Andrew, Ridley-Ellis, Daniel and Gardiner, Barry A (2008) Properties of UK-Grown Sitka Spruce: Extent and Sources of Variation. Proceedings of the 10th World Conference on Timber Engineering, Miyazaki 2008.
Khokhar, Aamir Muhammad, Zhang, Hexin, Ridley-Ellis, Daniel and Moore, John (2008) Determining the Shear Modulus of Sitka Spruce from Torsion Tests. Proceedings of the 10th World Conference on Timber Engineering, Miyazaki 2008 (Paper ).
Ridley-Ellis, Daniel, Nolte, Sabine and Condon, Peter (2008) Online learning for the forest and timber industries. In: 10th World Conference on Timber Engineering 2008. Engineered Wood Products Association, pp. 461-469. ISBN 9781615670888
Hill, Callum (2008) The reduction in the fibre saturation point of wood due to chemical modification using anhydride reagents: A reappraisal. Holzforschung, 62 (4). pp. 423-428. ISSN 1437 434X
Asif, Muhammad, Currie, John and Muneer, Tariq (2007) The role of renewable and non-renewable sources for meeting future UK energy needs. International Journal Nuclear Governance, Economy and Ecology, 1 (4). pp. 372-383. ISSN 1742-4186
Yella, Siril, Gupta, Naren K and Dougherty, Mark S (2007) Comparison of pattern recognition techniques for the classification of impact acoustic emissions. Transportation Research Part C: Emerging Technologies, 15 (6). pp. 345-360. ISSN 0968-090X
Ridley-Ellis, Daniel, Owen, J S and Davies, G (2007) Torsion tests on small and large-scale RHS with circular wall cut-outs. In: 10th Intl Symp on Tubular Structures (ISTS), 18th-20th September, Madrid, Spain.
Lopez-Ibanez, Manuel, Prasad, T Devi and Paechter, Ben (2007) Solving optimal pump control problem using max-min ant system. In: 9th Annual Genetic and Evolutionary Computation Conference (GECCO), 2007, London.
Wigan, Marcus and Kukla, Robert (2007) The ReOrient knowledge base. EC DGTREN.
Hairstans, Robert (2007) Optimisation of timber platform frame construction. PhD thesis, Edinburgh Napier University.
Hughes, M, Carpenter, J and Hill, Callum (2007) Deformation and fracture behaviour of flax fibre reinforced thermosetting polymer matrix composites. Journal of Materials Science, 42 (7). pp. 2499-2511. ISSN 0022-2461
Zhang, Johnson and Kuang, J S (2007) Eight-node Reissner-Mindlin plate element based on boundary interpolation using Timoshenko beam function. International Journal for Numerical Methods in Engineering, 69 (7). pp. 1345-1373. ISSN 1097 0207
Summers, David (2007) Complementary modes of impulse generation for flow past a three-dimensional obstacle. Theoretical and Computational Fluid Dynamics, 21 (1). pp. 15-38. ISSN 0935-4964
Zhang, Hexin and Kuang, J S (2007) Eight-node Reissner-Mindlin plate element based on boundary interpolation using Timoshenko beam function. International Journal for Numerical Methods in Engineering, 69 (7). pp. 1345-1373. ISSN 1097 0207
Wigan, Marcus and Southworth, Frank (2007) Movements of goods, services and people: entanglements with sustainability implications. In: Space - Economy Interactions in a Sustainable Setting. Elsevier, Chapter 9. ISBN 978-0-08-044709-4
Kumar, Vinoth (2007) Object-tracking in Health Care. MEng thesis, Edinburgh Napier University.
Kermani, Abdy and Hairstans, Robert (2006) Racking resistance of structural insulated panels. Journal of Structural Engineering, 132 (11). pp. 1806-1812. ISSN 0733-9445
Watt, Michael S, Moore, John R, Facon, Jean-Phillipe, Downes, Geoff M, Clinton, Peter W, Coker, Graham, Davis, Murray R, Simcock, Robyn, Parfitt, Roger L, Dando, John, Mason, Euan G and Bown, Horacio E (2006) Modelling environmental variation in Young’s modulus for Pinus radiata and implications for determination of critical buckling height. Annals of Botany, 98 (4). pp. 765-775. ISSN 0305-7364
Addison, Paul, Morvidone, Marcela, Watson, James N and Clifton, David (2006) Wavelet transform reassignment and the use of low-oscillation complex wavelets. Mechanical Systems and Signal Processing, 20 (6). pp. 1429-1443. ISSN 0888-3270
Reichert, Thomas and Ridley-Ellis, Daniel (2006) Geometric Non-Linear Behaviour of Single Shear Bolted Joints. Proceedings of the 9th World Conference on Timber Engineering, Portland 2006.
Zhang, Hexin, Ridley-Ellis, Daniel and Hapca, Adrian Ilie (2006) Timber Plate Dynamics with Space-Time Finite Element. Proceedings of the 9th World Conference on Timber Engineering, Portland 2006.
Khalaf, Fouad (2006) Using crushed clay brick as coarse aggregates in concrete. ASCE Journal of Materials in Civil Engineering, 18 (4). pp. 518-526. ISSN 0899-1561
Grassie, Tom (2006) Performance and modelling of a PV driven transpired solar air heater. In: Eurosun 2006 Conference, 26th - 29th June 2006, Glasgow: Glasgow Caledonian University, Saltire Centre.
Zhang, Ben and Bicanic, Nenad (2006) Fracture energy of high-performance concrete at high temperatures up to 450°C: the effects of heating temperatures and testing conditions (hot and cold). Magazine of Concrete Research, 58 (5). pp. 277-288. ISSN 0024-9831
Coste, Guillaume, Kermani, Abdy and Porteous, Alexander (2006) Performance of helically shaped metal fasteners in timber. Proceedings of the Institution of Civil Engineers, Construction Materials, 159 (2). pp. 53-60. ISSN 1747-650X
Bahadori-Jahromi, Ali, Kermani, Abdy, Zhang, Ben, Harte, A M, Bayne, K, Turner, J and Walford, B (2006) Influence of cross-section on the strength of timber beams. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 159 (2). pp. 103-114. ISSN 0965-0911
Bahadori-Jahromi, Ali (2006) Development and evaluation of composite insulated beams. PhD thesis, Napier University, Edinburgh, Scotland, UK.
Kermani, Abdy (2006) Performance of structural insulated panels. Proceedings of ICE: Journal of Structures & Buildings, 159 (1). pp. 13-19. ISSN 0965-0911
Joel, Sian, Smyth, Michael and Rodgers, Paul (2006) Supporting design communities: designers' perspectives. In: Proc of Engineering and Product Design Education E&PDE06. E&PDE06, Salzburg University of Applied Sciences, Salzburg, Austria. .
Freedman, Geoffrey J H (2006) The development of transversely stress-laminated timber arch bridges for pedestrian and minor vehicle use. PhD thesis, Edinburgh Napier University.
Kermani, Abdy and Freedman, Geoffrey J H (2005) Performance of a 20m span stress-laminated-timber arch bridge. Proceedings of the Institution of Civil Engineers, Bridge Engineering, 158 (4). pp. 155-164. ISSN 14784637
McCourt, I and Kubie, Jorge (2005) Limits on the penetration of coiled tubing in horizontal oil wells: effect of the pipe geometry. Proceedings of the Institution of Mechanical Engineers: Part C - Journal of Mechanical Engineering Science, 219 (11). pp. 1191-1197. ISSN 0954 4062
Khalaf, Fouad (2005) New test for determination of masonry tensile bond strength. ASCE Journal of Materials in Civil Engineering, 17 (6). pp. 725-732. ISSN 0899 1561
Moore, John R, Gardiner, Barry A, Blackburn , Guy R A, Brickman, Andrew and Maguire, Douglas A (2005) An inexpensive instrument to measure the dynamic response of standing trees to wind loading. Agricultural and Forest Meteorology, 132 (1-2). pp. 78-83. ISSN 0168 1923
Khalaf, Fouad and De Venny, Alan S (2005) Properties of new and recycled clay brick aggregates for use in concrete. ASCE Journal of Materials in Civil Engineering, 17 (4). pp. 456-464. ISSN 0899-1561
Moore, John R and Maguire, Douglas A (2005) Natural sway frequencies and damping ratios of trees: influence of crown structure. Trees - Structure and Function, 19 (4). 363-373. ISSN 0931-1890
Porteous, Alexander and Kermani, Abdy (2005) Fully overlapping nailed joints with steel gussets in timber structures. ASCE Journal of Structural Engineering, 131 (5). pp. 806-815. ISSN 0733 9445
Hill, Callum, Forster, S C, Farahani, M R M, Hale, M D C, Ormondroyd, G A and Williams, G R (2005) An investigation of cell wall micropore blocking as a possible mechanism for the decay resistance of anhydride modified wood. International Biodeterioration & Biodegradation, 55 (1). pp. 69-76.
MacKenzie, Robin, Smith , Sean and Fairfield, Charlie (2005) New directions for NDT in forestry. Insight - Non-Destructive Testing and Condition Monitoring, 47 (7). 416 - 420. ISSN 1354 2575
Joel, Sian, Smyth, Michael and Rodgers, Paul (2005) An ethnomethodological approach to the early stages of product design practice. In: Crossing Design Boundaries: Proceedings of the 3rd Engineering & Product Design Education International Conference. Taylor & Francis, London, pp. 157-162. ISBN 978-0-415-39118-4
McDougall, John, Pyrah, Ian, Yuen, S T S, Monteiro, V E D, Melo, M C and Juca, J F T (2004) Decomposition and settlement in landfilled waste and other soil-like materials. Geotechnique, 54 (9). pp. 605-610. ISSN 0016 8505
Khalaf, Fouad and De Venny, Alan S (2004) Performance of brick aggregate concrete at high temperatures. ASCE Journal of Materials in Civil Engineering, 16 (6). pp. 556-566. ISSN 0899-1561
McCourt, I, Truslove, T E and Kubie, Jorge (2004) On the penetration of tubular drill pipes in horizontal oil wells. Proceedings of the Institution of Mechanical Engineers: Part C - Journal of Mechanical Engineering Science, 218 (9). pp. 1063-1081. ISSN 0954 4062
McDougall, John and Pyrah, Ian (2004) Phase relations for decomposable soils. Geotechnique, 54 (7). pp. 487-494. ISSN 0016 8505
Hairstans, Robert, Kermani, Abdy and Lawson, R (2004) Crane erection of timber-trussed rafter roofs. Engineering Sustainability, 157 (2). pp. 89-98. ISSN 1478 4629
Wilson, John and Gupta, Naren K (2004) Equipment for the investigation of the accelerated curing of concrete using direct electric conduction. Measurement, 35 (3). pp. 243-250. ISSN 0263 2241
Lo, Hong K, Yip, C W and Wan, Quentin (2004) Modeling competitive multi-modal transit services; a nested logit approach. Transportation Research Part C Emerging Technologies, 12 (3-4). pp. 251-272. ISSN 0968090X
Hill, Callum, Farahani, M R M and Hale, M D C (2004) The use of organo-alkoxysilane coupling agents for wood preservation. Holzforschung, 58 (3). pp. 316-325. ISSN 0018-3830
Moore, John and Maguire, Douglas A (2004) Natural sway frequencies and damping ratios of trees: concepts, review and synthesis of previous studies. Trees - Structure and Function, 18 (2). pp. 195-203. ISSN 0931-1890
Hairstans, Robert, Dodyk, R, Kermani, Abdy, Lawson, R and MacKenzie, Robin (2004) Knowledge transfer in timber frame construction. In: Proceedings of the 9th World Conference on Timber Engineering, Oregon, USA, 6th - 10th August 2006, Portland, Oregon, USA.
Anderson, D E, Truslove, T E and Kubie, Jorge (2003) Thermal modelling and optimisation of heat transfer in a high temperature theatre luminaire. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 217 (9). pp. 1039-1048. ISSN 0954 4062
Ridley-Ellis, Daniel, Owen, J S and Davies, G (2003) Design of RHS for torsion using simplified thick wall theory. The Structural Engineer, 81 (11). pp. 31-36. ISSN 1466-5123
Luo, En, Huang, Weijiang and Zhang, Johnson (2003) Unconventional Hamilton-type variational principle in phase space and symplectic algorithm. Science in China Series G: Physics, Mechanics and Astronomy, 46 (3). pp. 248-258. ISSN 1862 2844
Ridley-Ellis, Daniel, Owen, J S and Davies, G (2003) Torsional behaviour of rectangular hollow sections. Journal of Constructional Steel Research, 59 (5). pp. 641-663. ISSN 0143 974X
Reid, Alasdair, Fairfield, Charlie and Sibbald, A (2003) Load spectrum for utility trenches in the footway. Municipal Engineer, 156 (1). pp. 57-66. ISSN 0965 0903
Porteous, Alexander (2003) The Structural behaviour of timber joints made with fully overlapping nails. PhD thesis, Napier University.
Smith, Sean, MacKenzie, Robin, MacKenzie, Richard and Waters-Fuller, Tim (2003) The implications of ISO 717 spectrum adaption terms for residential dwellings. Proceedings of the Institute of Acoustics, 25 (5).
Valha, J, Lewis, J S and Kubie, Jorge (2002) A numerical study of the behaviour of a gas-liquid interface subjected to periodic vertical motion. International Journal for Numerical Methods in Fluids, 40 (5). pp. 697-721. ISSN 0271-2091
Curling, Simon, Clausen, Carol A and Winandy, Jerrold E (2002) Relationships between mechanical properties, weight loss and chemical composition of wood during incipient brown rot decay. Forest Products Journal, 52 (7/8). pp. 34-39. ISSN 0015 7473
Ridley-Ellis, Daniel, Owen, J S and Davies, G (2002) Theoretical and measured torsional behaviour of rectangular hollow sections. In: 12th Intl Offshore and Polar Engineering Conference (ISOPE), Kyushu, 2002, 26th-31st May 2002, Kitakyushu, Japan.
Zhang, Ben and Bicanic, Nenad (2002) Residual fracture toughness of normal- and high-strength gravel concrete after heating to 600°C. ACI Materials Journal, 99 (3). pp. 217-226. ISSN 0889-325X
Zagyapan, M and Fairfield, Charlie (2002) Continuous surface wave and impact methods of measuring the stiffness and density of railway ballast. NDT & E International, 35 (2). pp. 75-81. ISSN 0963 8695
Zhang, Ben, Bicanic, Nenad, Pearce, Christopher J and Phillips, David V (2002) Relationship between brittleness and moisture loss of concrete exposed to high temperatures. Cement and Concrete Research, 32 (3). pp. 363-371. ISSN 0008 8846
Asif, Muhammad (2002) Life cycle assessment of aluminium-clad timber windows. PhD thesis, Napier University.
Abdulrahman, Nasser A H (2002) Load transfer mechanism in punched metal plate timber connections. PhD thesis, Edinburgh Napier University.
Turner, Philip, Megown, K A, Grzeskowiak, V, Megown, R A, Pauck, J and Alborough, D (2001) An industrial evaluation of a stand level grading system for Pinus patula. South African Forestry Journal, 190 (1). pp. 105-114. ISSN 1029 5925
Hounsome, I W S and Fairfield, Charlie (2001) Failure probabilities for plastic utility ducts in roadway trench reinstatements. Transport, 147 (1). pp. 1-7. ISSN 0965 092X
Weller, H, Setiadi, D, Armitage, Alistair and Binnie, David (1999) Monolithic CMOS pyroelectric focal plane array. IoP Publishing, Bristol, Cardiff, GB. ISBN 0750306629
Abodahab , Nasser (1998) Temperature distribution models for double-glazed windows and their use in assessing condensation occurrence. PhD thesis, Edinburgh Napier University.
Buchanan, William J and Gupta, Naren K (1997) A novel parallel processing synchronization method for observing electric fields in and around PCBs. International Journal of Electronics, 82 (1). pp. 61-76. ISSN 0020 7217
Starrs, Gerard (1994) Measurement of the electrical properties of concrete at radio frequencies. PhD thesis, Edinburgh Napier University.
Scrivener, Stephen A R, Clark, Sean, Clarke, A A, Connolly, John H, Garner, S W, Palmen, H, Smyth, Michael and Schappo, A (1993) Real-time communication between dispersed work groups via speech and drawing. Wirtschaftsinformatik, 35 (2). pp. 149-156. ISSN 0937 6429