Browse by Dewey Subject
Number of items at this level: 80.
Lombardi, Domenico, Bhattacharya, Subhamoy, Scarpa, Fabrizio and Bianchi, Matteo (2015) Dynamic response of a geotechnical rigid model container with absorbing boundaries. Soil Dynamics and Earthquake Engineering, 69. pp. 46-56. ISSN 0267 7261
Lombardi, Domenico, Bhattacharya, Subhamoy, Hyodo, Masayuki and Kaneko, Takashi (2014) Undrained behaviour of two silica sands and practical implications for modelling SSI in liquefiable soils. Soil Dynamics and Earthquake Engineering, 66. pp. 293-304. ISSN 0267 7261 (In Press)
Robin, William (2014) Series solutions of partial differential equations using the complex integral method. International Mathematical Forum, 9 (31). pp. 1477-1494. ISSN 1314 7536
Robin, William (2014) Similarity solutions to unsteady pseudoplastic flow near a moving wall. International Mathematical Forum, 9 (31). pp. 1465-1475. ISSN 1314 7536
McDougall, John, Kelly, Darren and Barreto, Daniel (2013) Particle loss and volume change on dissolution: experimental results and analysis of particle size and amount effects. Acta Geotechnica.
Shire, Thomas, O'Sullivan, Catherine, Barreto, Daniel and Gaudray, G (2013) Quantifying stress-induced anisotropy using inter-void constrictions. Geotechnique, 63 (1). pp. 85-91. ISSN 0016 8505
Elsayah, Othoman, Gupta, Naren K, Zhang, Ben and Wamuziri, Sam (2013) Contractor selection using an integrated AHP and TOPSIS model. International Journal of Civil and Environmental Engineering, 35 (1). pp. 1116-1126. ISSN 1701-8282
Lombardi, Domenico, Bhattacharya, Subhamoy and Muir Wood, David (2013) Dynamic soil–structure interaction of monopile supported wind turbines in cohesive soil. Soil Dynamics and Earthquake Engineering, 49. pp. 165-180. ISSN 0267 7261
O'Sullivan, Catherine, Barreto, Daniel, Hanley, K J and Wadee, M A (2013) Use of DEM and elastic stability analysis to explain the influence of the intermediate principal stress on shear strength. Géotechnique, 63 (15). pp. 1298-1309. ISSN 0016-8505
McDougall, J R, Barreto, Daniel, Imre, E and Kelly, Darren (2013) Volumetric consequences of particle loss by grading entropy. Géotechnique, 63 (3). pp. 262-266. ISSN 0016-8505
Barreto, Daniel and O'Sullivan, Catherine (2012) The influence of inter-particle friction and the intermediate stress ratio on soil response under generalised stress conditions. Granular Matter, 14 (4). pp. 505-521. ISSN 1434-5021
Ridley-Ellis, Daniel, Moore, John, Lyon, Andrew J, Searles, Gregory J and Gardiner, Barry A (2009) Strategic Integrated Research in Timber: Getting the most out of the UK's timber resource. 11th International Conference on Non-conventional Materials and Technologies (NOCMAT 2009). ISSN 978-1-86197-179-1
Hill, Callum A S (2009) Why does acetylation protect wood from microbiological attack? Wood Material Science and Engineering, 4 (1-2). pp. 37-45. ISSN 1748-0272
Hill, Callum A S, Curling, Simon, Kwon, Jin H and Marty, Virginie (2009) A study of the decay resistance of a range of anhydride modified hardwood and softwood species exposed to the brown rot fungus Coniophora puteana. Holzforschung, 63 (5). pp. 619-625. ISSN 0018-3830
Zaihan, Jalaludin, Hill, Callum A S, Curling, Simon, Hashim, W S and Hamdan, Hussein (2008) Moisture adsorption isotherms of Acacia Mangium and Endospermum Malaccense using dynamic vapour sorption. Journal of Tropical Forest Science, 21 (3). pp. 277-285. ISSN 0128-1283
Reichert, Thomas and Ridley-Ellis, Daniel (2008) 3D lattice model for post-yield and fracture behaviour of timber. Proceedings of the 10th World Conference on Timber Engineering, Miyazaki 2008.
Khokhar, Aamir Muhammad, Zhang, Hexin, Ridley-Ellis, Daniel and Moore, John (2008) Determining the Shear Modulus of Sitka Spruce from Torsion Tests. Proceedings of the 10th World Conference on Timber Engineering, Miyazaki 2008 (Paper ).
Hill, Callum A S (2008) The reduction in the fibre saturation point of wood due to chemical modification using anhydride reagents: A reappraisal. Holzforschung, 62 (4). pp. 423-428. ISSN 1437 434X
Yella, Siril, Gupta, Naren K and Dougherty, Mark S (2007) Comparison of pattern recognition techniques for the classification of impact acoustic emissions. Transportation Research Part C: Emerging Technologies, 15 (6). pp. 345-360. ISSN 0968-090X
Zhang, Johnson and Kuang, J S (2007) Eight-node Reissner-Mindlin plate element based on boundary interpolation using Timoshenko beam function. International Journal for Numerical Methods in Engineering, 69 (7). pp. 1345-1373. ISSN 1097 0207
Summers, David (2007) Complementary modes of impulse generation for flow past a three-dimensional obstacle. Theoretical and Computational Fluid Dynamics, 21 (1). pp. 15-38. ISSN 0935-4964
Zhang, Hexin and Kuang, J S (2007) Eight-node Reissner-Mindlin plate element based on boundary interpolation using Timoshenko beam function. International Journal for Numerical Methods in Engineering, 69 (7). pp. 1345-1373. ISSN 1097 0207
Kermani, Abdy and Hairstans, Robert (2006) Racking resistance of structural insulated panels. Journal of Structural Engineering, 132 (11). pp. 1806-1812. ISSN 0733-9445
Addison, Paul, Morvidone, Marcela, Watson, James N and Clifton, David (2006) Wavelet transform reassignment and the use of low-oscillation complex wavelets. Mechanical Systems and Signal Processing, 20 (6). pp. 1429-1443. ISSN 0888-3270
Reichert, Thomas and Ridley-Ellis, Daniel (2006) Geometric Non-Linear Behaviour of Single Shear Bolted Joints. Proceedings of the 9th World Conference on Timber Engineering, Portland 2006.
Zhang, Hexin, Ridley-Ellis, Daniel and Hapca, Adrian Ilie (2006) Timber Plate Dynamics with Space-Time Finite Element. Proceedings of the 9th World Conference on Timber Engineering, Portland 2006.
Khalaf, Fouad (2006) Using crushed clay brick as coarse aggregates in concrete. ASCE Journal of Materials in Civil Engineering, 18 (4). pp. 518-526. ISSN 0899-1561
Zhang, Ben and Bicanic, Nenad (2006) Fracture energy of high-performance concrete at high temperatures up to 450°C: the effects of heating temperatures and testing conditions (hot and cold). Magazine of Concrete Research, 58 (5). pp. 277-288. ISSN 0024-9831
Coste, Guillaume, Kermani, Abdy and Porteous, Alexander (2006) Performance of helically shaped metal fasteners in timber. Proceedings of the Institution of Civil Engineers, Construction Materials, 159 (2). pp. 53-60. ISSN 1747-650X
Bahadori-Jahromi, Ali, Kermani, Abdy, Zhang, Ben, Harte, A M, Bayne, K, Turner, J and Walford, B (2006) Influence of cross-section on the strength of timber beams. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 159 (2). pp. 103-114. ISSN 0965-0911
Kermani, Abdy (2006) Performance of structural insulated panels. Proceedings of ICE: Journal of Structures & Buildings, 159 (1). pp. 13-19. ISSN 0965-0911
Freedman, Geoffrey J H and Kermani, Abdy (2006) Stress-Lamination: Utilising low-grade timber in construction. Proceedings of the Institution of Civil Engineers, Construction Materials, 159 (CM1). pp. 7-10. ISSN 1747-650X
Kermani, Abdy and Freedman, Geoffrey J H (2005) Performance of a 20m span stress-laminated-timber arch bridge. Proceedings of the Institution of Civil Engineers, Bridge Engineering, 158 (4). pp. 155-164. ISSN 14784637
Khalaf, Fouad (2005) New test for determination of masonry tensile bond strength. ASCE Journal of Materials in Civil Engineering, 17 (6). pp. 725-732. ISSN 0899 1561
Moore, John R, Gardiner, Barry A, Blackburn , Guy R A, Brickman, Andrew and Maguire, Douglas A (2005) An inexpensive instrument to measure the dynamic response of standing trees to wind loading. Agricultural and Forest Meteorology, 132 (1-2). pp. 78-83. ISSN 0168 1923
Khalaf, Fouad and De Venny, Alan S (2005) Properties of new and recycled clay brick aggregates for use in concrete. ASCE Journal of Materials in Civil Engineering, 17 (4). pp. 456-464. ISSN 0899-1561
Moore, John R and Maguire, Douglas A (2005) Natural sway frequencies and damping ratios of trees: influence of crown structure. Trees - Structure and Function, 19 (4). 363-373. ISSN 0931-1890
Porteous, Alexander and Kermani, Abdy (2005) Fully overlapping nailed joints with steel gussets in timber structures. ASCE Journal of Structural Engineering, 131 (5). pp. 806-815. ISSN 0733 9445
Freedman, Geoffrey J H and Kermani, Abdy (2005) Sustainable timber engineering structures. Journal of the Institution of Agricultural Engineers, Landwards, 60 (5). pp. 2-10. ISSN 1363-8300
McDougall, John, Pyrah, Ian, Yuen, S T S, Monteiro, V E D, Melo, M C and Juca, J F T (2004) Decomposition and settlement in landfilled waste and other soil-like materials. Geotechnique, 54 (9). pp. 605-610. ISSN 0016 8505
Khalaf, Fouad and De Venny, Alan S (2004) Performance of brick aggregate concrete at high temperatures. ASCE Journal of Materials in Civil Engineering, 16 (6). pp. 556-566. ISSN 0899-1561
Freedman, Geoffrey J H and Kermani, Abdy (2004) Stress laminated arches: a stronger case for timber bridges. Proceedings of the Institution of Civil Engineers, Civil Engineering, 157 (4). pp. 172-178. ISSN 0965 089X
McDougall, John and Pyrah, Ian (2004) Phase relations for decomposable soils. Geotechnique, 54 (7). pp. 487-494. ISSN 0016 8505
Hairstans, Robert, Kermani, Abdy and Lawson, R (2004) Crane erection of timber-trussed rafter roofs. Engineering Sustainability, 157 (2). pp. 89-98. ISSN 1478 4629
Wilson, John and Gupta, Naren K (2004) Equipment for the investigation of the accelerated curing of concrete using direct electric conduction. Measurement, 35 (3). pp. 243-250. ISSN 0263 2241
Lo, Hong K, Yip, C W and Wan, Quentin (2004) Modeling competitive multi-modal transit services; a nested logit approach. Transportation Research Part C Emerging Technologies, 12 (3-4). pp. 251-272. ISSN 0968090X
Ridley-Ellis, Daniel, Owen, J S and Davies, G (2003) Design of RHS for torsion using simplified thick wall theory. The Structural Engineer, 81 (11). pp. 31-36. ISSN 1466-5123
Ridley-Ellis, Daniel, Owen, J S and Davies, G (2003) Torsional behaviour of rectangular hollow sections. Journal of Constructional Steel Research, 59 (5). pp. 641-663. ISSN 0143 974X
Reid, Alasdair, Fairfield, Charles A and Sibbald, A (2003) Load spectrum for utility trenches in the footway. Municipal Engineer, 156 (1). pp. 57-66. ISSN 0965 0903
Zhang, Ben and Bicanic, Nenad (2002) Residual fracture toughness of normal- and high-strength gravel concrete after heating to 600°C. ACI Materials Journal, 99 (3). pp. 217-226. ISSN 0889-325X
Zagyapan, M and Fairfield, Charles A (2002) Continuous surface wave and impact methods of measuring the stiffness and density of railway ballast. NDT & E International, 35 (2). pp. 75-81. ISSN 0963 8695
Zhang, Ben, Bicanic, Nenad, Pearce, Christopher J and Phillips, David V (2002) Relationship between brittleness and moisture loss of concrete exposed to high temperatures. Cement and Concrete Research, 32 (3). pp. 363-371. ISSN 0008 8846
Ng, Kwooi-Hock, Fairfield, Charles A and Sibbald, A (2001) Risk sensitivity applied to arch bridge assessments: an introduction. The Structural Engineer, 79 (18). pp. 31-37. ISSN 1466 5123
Hounsome, I W S and Fairfield, Charles A (2001) Failure probabilities for plastic utility ducts in roadway trench reinstatements. Transport, 147 (1). pp. 1-7. ISSN 0965 092X
McDougall, John, Fleming, I, Thiel, R, Dewaele, P, Parker, D and Kelly, Darren (2013) Mass loss and volume change: From sand-salt analogues to MSW. In: Coupled Phenomena in Environmental Geotechnics. CRC Press, pp. 189-197. ISBN 978-1-138-00060-5
Barreto, Daniel, O'Sullivan, Catherine and Zdravkovic, L (2009) Quantifying the evolution of soil fabric under different stress paths. In: POWDERS AND GRAINS 2009: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON MICROMECHANICS OF GRANULAR MEDIA. American Institute of Physics, pp. 181-184. ISBN 978-0-7354-0682-7
Ridley-Ellis, Daniel, Nolte, Sabine and Condon, Peter (2008) Online learning for the forest and timber industries. In: 10th World Conference on Timber Engineering 2008. Engineered Wood Products Association, pp. 461-469. ISBN 9781615670888
Wigan, Marcus and Southworth, Frank (2007) Movements of goods, services and people: entanglements with sustainability implications. In: Space - Economy Interactions in a Sustainable Setting. Elsevier, Chapter 9. ISBN 978-0-08-044709-4
Conference or Workshop Item
Ridley-Ellis, Daniel, Moore, John and Khokhar, Aamir Muhammad (2009) Random acts of elasticity: MoE, G and EN408. In: WG meetings COST Action E53 "Quality Control for Wood and Wood Products" and Wood Drying Seminar in Bled, Slovenia, 23rd April 2009, Bled, Slovenia.
O'Sullivan, Catherine, Cui, L and Barreto, Daniel (2009) Radial periodic boundaries for axi-symmetric DEM simulations: development, implementation and validation. In: International Conference on Particle-Based Methods: Particles, 25-27 November 2009, Barcelona, Spain.
Ridley-Ellis, Daniel, Moore, John and Lyon, Andrew J (2008) Strength grading and the end user – lessons from the SIRT project at Napier University. In: Conference COST Action E53 “End user’s needs for wood material and products” , 29th - 30th October 2008, Delft, Netherlands.
Ridley-Ellis, Daniel, Owen, J S and Davies, G (2007) Torsion tests on small and large-scale RHS with circular wall cut-outs. In: 10th Intl Symp on Tubular Structures (ISTS), 18th-20th September, Madrid, Spain.
Freedman, Geoffrey J H and Kermani, Abdy (2004) Development of long span stress-laminated timber arch bridges. In: 8th World Conference on Timber Engineering, 14th - 17th June 2004, Finland, Lahti.
Hairstans, Robert, Dodyk, R, Kermani, Abdy, Lawson, R and Mackenzie, Robin (2004) Knowledge transfer in timber frame construction. In: Proceedings of the 9th World Conference on Timber Engineering, Oregon, USA, 6th - 10th August 2006, Portland, Oregon, USA.
Ridley-Ellis, Daniel, Owen, J S and Davies, G (2002) Theoretical and measured torsional behaviour of rectangular hollow sections. In: 12th Intl Offshore and Polar Engineering Conference (ISOPE), Kyushu, 2002, 26th-31st May 2002, Kitakyushu, Japan.
Tsechelidou, Eleni (2013) Investigating gaps in higher civil engineering education regarding students’ level of knowledge and understanding of basic structural concepts. MPhil thesis, Edinburgh Napier University.
Jabir, Saad A A (2011) Thick film electronic ceramic sensors for civil structures health monitoring. PhD thesis, Edinburgh Napier University.
Reynolds, Timothy N (2010) Variables affecting the stiffness and distortion of Sitka spruce. PhD thesis, Edinburgh Napier University.
Weckendorf, Jan (2009) Dynamic response of structural timber flooring systems. PhD thesis, Edinburgh Napier University.
Abukersh, Salem Ahmed (2009) High quality recycled aggregate concrete. PhD thesis, Edinburgh Napier University.
Reichert, Thomas (2009) DEVELOPMENT OF 3D LATTICE MODELS FOR PREDICTING NONLINEAR TIMBER JOINT BEHAVIOUR. PhD thesis, Edinburgh Napier University.
Hairstans, Robert (2007) Optimisation of timber platform frame construction. PhD thesis, Edinburgh Napier University.
Bahadori-Jahromi, Ali (2006) Development and evaluation of composite insulated beams. PhD thesis, Napier University, Edinburgh, Scotland, UK.
Freedman, Geoffrey J H (2006) The development of transversely stress-laminated timber arch bridges for pedestrian and minor vehicle use. PhD thesis, Edinburgh Napier University.
Swan, Iain Peter (2006) The efffect of elastomeric bearing degradation on bridge dynamic response. PhD thesis, Edinburgh Napier University.
Porteous, Alexander (2003) The Structural behaviour of timber joints made with fully overlapping nails. PhD thesis, Napier University.
Abdulrahman, Nasser A H (2002) Load transfer mechanism in punched metal plate timber connections. PhD thesis, Edinburgh Napier University.
Ng, Kwooi-Hock (1999) Analysis of masonry arch bridges. PhD thesis, Edinburgh Napier University.
Abodahab , Nasser (1998) Temperature distribution models for double-glazed windows and their use in assessing condensation occurrence. PhD thesis, Edinburgh Napier University.
Wigan, Marcus and Kukla, Robert (2007) The ReOrient knowledge base. EC DGTREN.