Browse by Dewey Subject
Number of items at this level: 55.
Jadevicius, Arvydas, Sloan, Brian and Brown, Andrew (2012) Development of a Sesma model for short-term investment decision-making. In: 4th Annual Conference of the Global Chinese Real Estate Congress (GCREC), 3-5 July 2012, Macau, China. (Submitted)
Rose, William (2012) The Application of Human Factors through the Assessment and Improvement of Behavioural Safety to Improve Safety Performance in Small to Medium Sized Enterprises. PhD thesis, Edinburgh Napier University.
McGregor, Iain, Larsson, Pontus and Turner, Phil (2011) Evaluating a vehicle auditory display: comparing a designer's expectations with listeners' experiences. In: 29th conference of the European Association of Cognitive Ergonomics, 24-26 August 2011, Rostock, Germany. (Unpublished)
Jabir, Saad A A and Gupta, Naren K (2011) Thick-Film ceramic strain sensors for structural health monitoring. IEEE Transactions on Instrumentation and Measurement, 60 (11). pp. 3669-3676. ISSN 0018-9456
Dykes, Tommy, Rodgers, Paul and Smyth, Michael (2009) Towards a new disciplinary framework for contemporary design practice. CoDesign, 5 (2). pp. 99-116. ISSN 1571-0882
Cowan, John (2009) External Examining: an Engineering Subject Centre guide. Manual. Higher Education Academy, York.
Cowan, John (2009) Quality Assurance in European Engineering Education – Present and Future Challenges. In: Engineering Education Quality Assurance: A Global Perspective. Springer-Verlag, US, pp. 29-40. ISBN 978-1-4419-0554-3
Ridley-Ellis, Daniel (2008) Promoting the science and engineering of timber to children. Proceedings of the 10th World Conference on Timber Engineering, Miyazaki 2008.
Moore, John, Lyon, Andrew, Ridley-Ellis, Daniel and Gardiner, Barry A (2008) Properties of UK-Grown Sitka Spruce: Extent and Sources of Variation. Proceedings of the 10th World Conference on Timber Engineering, Miyazaki 2008.
Barlow, Peter G, Brown, David M, Donaldson, Ken, McCallum, Janis and Stone, Vicki (2008) Reduced alveolar macrophage migration induced by acute ambient particle (PM10) exposure. Cell Biology and Toxicology, 24 (3). pp. 243-252. ISSN 0742-2091
Rodgers, Paul, Rogers, Jon, Anusas, Mike, Milton, Alex, Pengelly, Jon, Whittet, Craig, Marshall, John, Titley, Will, Colvin, Angus, Smyth, Michael, Charles, Cezanne and Kasprzak, Michelle (2008) Product Scotland: bringing designers, anthropologists, artists and engineers together. In: Proceedings of Engineering and Product Design Conference. Design Society, Barcelona, pp. 377-382.
McGregor, Iain, Crerar, Alison, Benyon, David and LePlâtre, Grégory (2008) Visualising the soundfield and soundscape: extending Macaulay and Crerar’s 1998 method. In: ICAD 2008: The 14th annual International Conference on Auditory Display, 2008 June, Paris, France. (Unpublished)
Yella, Siril, Gupta, Naren K and Dougherty, Mark S (2007) Comparison of pattern recognition techniques for the classification of impact acoustic emissions. Transportation Research Part C: Emerging Technologies, 15 (6). pp. 345-360. ISSN 0968-090X
Ridley-Ellis, Daniel, Owen, J S and Davies, G (2007) Torsion tests on small and large-scale RHS with circular wall cut-outs. In: 10th Intl Symp on Tubular Structures (ISTS), 18th-20th September, Madrid, Spain.
Lopez-Ibanez, Manuel, Prasad, T Devi and Paechter, Ben (2007) Solving optimal pump control problem using max-min ant system. In: 9th Annual Genetic and Evolutionary Computation Conference (GECCO), 2007, London.
McGregor, Iain, Crerar, Alison, Benyon, David and LePlâtre, Grégory (2007) Establishing key dimensions for reifying soundfields and soundscapes from auditory professionals. In: ICAD 2007: The 13th International Conference on Auditory Display, 2007 June, Montreal, Canada. (Unpublished)
Hughes, M, Carpenter, J and Hill, Callum (2007) Deformation and fracture behaviour of flax fibre reinforced thermosetting polymer matrix composites. Journal of Materials Science, 42 (7). pp. 2499-2511. ISSN 0022-2461
Christofi, Nicholas, Fernandes, Teresa and Stone, Vicki (2007) Environmental Implications of Nanomaterials. In: Nanotoxicology : Characterization, Dosing and Health Effects. CRC Press, pp. 405-420. ISBN 978-1420045147
Watt, Michael S, Moore, John R, Facon, Jean-Phillipe, Downes, Geoff M, Clinton, Peter W, Coker, Graham, Davis, Murray R, Simcock, Robyn, Parfitt, Roger L, Dando, John, Mason, Euan G and Bown, Horacio E (2006) Modelling environmental variation in Young’s modulus for Pinus radiata and implications for determination of critical buckling height. Annals of Botany, 98 (4). pp. 765-775. ISSN 0305-7364
Addison, Paul, Morvidone, Marcela, Watson, James N and Clifton, David (2006) Wavelet transform reassignment and the use of low-oscillation complex wavelets. Mechanical Systems and Signal Processing, 20 (6). pp. 1429-1443. ISSN 0888-3270
Yella, Siril, Dougherty, Mark S and Gupta, Naren K (2006) Artificial intelligence techniques for the automatic interpretation of data from non-destructive testing. Insight - Non-Destructive Testing and Condition Monitoring, 48 (1). pp. 10-20. ISSN 1354 2575
Zhang, Ben and Bicanic, Nenad (2006) Fracture energy of high-performance concrete at high temperatures up to 450°C: the effects of heating temperatures and testing conditions (hot and cold). Magazine of Concrete Research, 58 (5). pp. 277-288. ISSN 0024-9831
Coste, Guillaume, Kermani, Abdy and Porteous, Alexander (2006) Performance of helically shaped metal fasteners in timber. Proceedings of the Institution of Civil Engineers, Construction Materials, 159 (2). pp. 53-60. ISSN 1747-650X
Strickfaden, Megan, Heylighen, A, Rodgers, Paul and Neuckermans, H (2006) Untangling the culture medium of student designers. CoDesign, 2 (2). 97 - 107. ISSN 1571 0882
McGregor, Iain, Crerar, Alison, Benyon, David and LePlâtre, Grégory (2006) Workplace soundscape mapping: a trial of Macaulay and Crerar’s method. In: ICAD 2006: The 12th International Conference on Auditory Display, 2006 June, London, UK. (Unpublished)
Muneer, Tariq and Munawwar, Saima (2006) Improved accuracy models for hourly diffuse solar radiation. ASME Journal of Solar Energy Engineering, 128 (1). pp. 104-117. ISSN 0199 6231
Kermani, Abdy (2006) Performance of structural insulated panels. Proceedings of ICE: Journal of Structures & Buildings, 159 (1). pp. 13-19. ISSN 0965-0911
Freedman, Geoffrey J H and Kermani, Abdy (2006) Stress-Lamination: Utilising low-grade timber in construction. Proceedings of the Institution of Civil Engineers, Construction Materials, 159 (CM1). pp. 7-10. ISSN 1747-650X
Joel, Sian, Smyth, Michael and Rodgers, Paul (2006) Supporting design communities: designers' perspectives. In: Proc of Engineering and Product Design Education E&PDE06. E&PDE06, Salzburg University of Applied Sciences, Salzburg, Austria. .
Barlow, Peter G, Clouter-Baker, Anna, Donaldson, Ken, MacCallum, Janis and Stone, Vicki (2005) Carbon black nanoparticles induce type II epithelial cells to release chemotaxins for alveolar macrophages. Particle and Fibre Toxicology, 2. pp. 11-24. ISSN 1743-8977
McCourt, I and Kubie, Jorge (2005) Limits on the penetration of coiled tubing in horizontal oil wells: effect of the pipe geometry. Proceedings of the Institution of Mechanical Engineers: Part C - Journal of Mechanical Engineering Science, 219 (11). pp. 1191-1197. ISSN 0954 4062
Khalaf, Fouad and De Venny, Alan S (2005) Properties of new and recycled clay brick aggregates for use in concrete. ASCE Journal of Materials in Civil Engineering, 17 (4). pp. 456-464. ISSN 0899-1561
Porteous, Alexander and Kermani, Abdy (2005) Fully overlapping nailed joints with steel gussets in timber structures. ASCE Journal of Structural Engineering, 131 (5). pp. 806-815. ISSN 0733 9445
MacKenzie, Robin, Smith , Sean and Fairfield, Charlie (2005) New directions for NDT in forestry. Insight - Non-Destructive Testing and Condition Monitoring, 47 (7). 416 - 420. ISSN 1354 2575
Joel, Sian, Smyth, Michael and Rodgers, Paul (2005) An ethnomethodological approach to the early stages of product design practice. In: Crossing Design Boundaries: Proceedings of the 3rd Engineering & Product Design Education International Conference. Taylor & Francis, London, pp. 157-162. ISBN 978-0-415-39118-4
Freedman, Geoffrey J H and Kermani, Abdy (2004) Stress laminated arches: a stronger case for timber bridges. Proceedings of the Institution of Civil Engineers, Civil Engineering, 157 (4). pp. 172-178. ISSN 0965 089X
McCourt, I, Truslove, T E and Kubie, Jorge (2004) On the penetration of tubular drill pipes in horizontal oil wells. Proceedings of the Institution of Mechanical Engineers: Part C - Journal of Mechanical Engineering Science, 218 (9). pp. 1063-1081. ISSN 0954 4062
Hill, Callum, Farahani, M R M and Hale, M D C (2004) The use of organo-alkoxysilane coupling agents for wood preservation. Holzforschung, 58 (3). pp. 316-325. ISSN 0018-3830
Moore, John and Maguire, Douglas A (2004) Natural sway frequencies and damping ratios of trees: concepts, review and synthesis of previous studies. Trees - Structure and Function, 18 (2). pp. 195-203. ISSN 0931-1890
Firth, A and Hajto, Janos (2004) Novel energy efficient lighting designs utilising fluorescent dye-doped polymers. Light & Engineering, 12 (4). pp. 55-59. ISSN 0236 2945
Luo, En, Huang, Weijiang and Zhang, Johnson (2003) Unconventional Hamilton-type variational principle in phase space and symplectic algorithm. Science in China Series G: Physics, Mechanics and Astronomy, 46 (3). pp. 248-258. ISSN 1862 2844
Ridley-Ellis, Daniel, Owen, J S and Davies, G (2003) Torsional behaviour of rectangular hollow sections. Journal of Constructional Steel Research, 59 (5). pp. 641-663. ISSN 0143 974X
Smith, Sean, MacKenzie, Robin, MacKenzie, Richard and Waters-Fuller, Tim (2003) The implications of ISO 717 spectrum adaption terms for residential dwellings. Proceedings of the Institute of Acoustics, 25 (5).
Valha, J, Lewis, J S and Kubie, Jorge (2002) A numerical study of the behaviour of a gas-liquid interface subjected to periodic vertical motion. International Journal for Numerical Methods in Fluids, 40 (5). pp. 697-721. ISSN 0271-2091
Curling, Simon, Clausen, Carol A and Winandy, Jerrold E (2002) Relationships between mechanical properties, weight loss and chemical composition of wood during incipient brown rot decay. Forest Products Journal, 52 (7/8). pp. 34-39. ISSN 0015 7473
Mitchell, Colin A (2002) A study of the powder processing, tribological performance and metallurgy of Aluminium-based, discontinuously reinforced metal matrix composites. PhD thesis, Edinburgh Napier University.
Zhang, Ben and Bicanic, Nenad (2002) Residual fracture toughness of normal- and high-strength gravel concrete after heating to 600°C. ACI Materials Journal, 99 (3). pp. 217-226. ISSN 0889-325X
Cowie, Jonathan (2002) Acquisition, efficiency and scale economies – an analysis of the British bus industry. Transport Reviews, 22 (2). pp. 147-157. ISSN 0144-1647
Zhang, Ben, Bicanic, Nenad, Pearce, Christopher J and Phillips, David V (2002) Relationship between brittleness and moisture loss of concrete exposed to high temperatures. Cement and Concrete Research, 32 (3). pp. 363-371. ISSN 0008 8846
Asif, Muhammad (2002) Life cycle assessment of aluminium-clad timber windows. PhD thesis, Napier University.
Turner, Philip, Megown, K A, Grzeskowiak, V, Megown, R A, Pauck, J and Alborough, D (2001) An industrial evaluation of a stand level grading system for Pinus patula. South African Forestry Journal, 190 (1). pp. 105-114. ISSN 1029 5925
Hounsome, I W S and Fairfield, Charlie (2001) Failure probabilities for plastic utility ducts in roadway trench reinstatements. Transport, 147 (1). pp. 1-7. ISSN 0965 092X
Heritage, Ian (2001) Direct electric curing of mortar and concrete. PhD thesis, Edinburgh Napier University.
Starrs, Gerard (1994) Measurement of the electrical properties of concrete at radio frequencies. PhD thesis, Edinburgh Napier University.
Scrivener, Stephen A R, Clark, Sean, Clarke, A A, Connolly, John H, Garner, S W, Palmen, H, Smyth, Michael and Schappo, A (1993) Real-time communication between dispersed work groups via speech and drawing. Wirtschaftsinformatik, 35 (2). pp. 149-156. ISSN 0937 6429