Copyright © 2005 Kozlova et al; licensee BioMed Central Ltd.
A new short-term toxicity assay using Aspergillus awamori with recombinant aequorin gene
Olga Kozlova: olga/at/lutess.com ; Mark Zwinderman: markzwinderman/at/surfactanttechnologies.com ; Nick Christofi: n.christofi/at/napier.ac.uk
Received January 12, 2005; Accepted July 2, 2005.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
BackgroundMost currently available short-term toxicity assays are based on bacterial cells. Therefore there is a need for novel eukaryotic microbial bioassays that will be relevant to higher eukaryotes such as animals and plants. Ca2+ is a universal intracellular signalling molecule found in all organisms from prokaryotes to highly specialized animal cells. In fungi calcium has been demonstrated to be involved in control of many important processes. The recombinant aequorin gene from the jellyfish Aequorea victoria responsible for the expression of the Ca2+-sensitive aequorin photoprotein has been cloned in the filamentous fungus Aspergillus awamori. This has allowed real life monitoring of [Ca2+]c changes in living fungal cells. When subjected to different physico-chemical stimuli fungal cells respond by transiently changing the concentration of free Ca2+ in the cytosol ([Ca2+]c) and the pattern of these changes (Ca2+ signature) is specific to each particular stimulus. Therefore it was interesting to investigate whether different environmental toxicants would be able to affect the pattern of [Ca2+]c changes in a reproducible and dose dependant manner.
ResultsToxicity bioassay has been developed to monitor changes [Ca2+]c of the recombinant fungus in the presence of toxicants representing heavy metals – Cr6+ and Zn2+ and a phenolic polar narcotic -3,5-DCP. The fungus responds to toxicants by a decrease in the amplitude of [Ca2+]c response to 5 mM external CaCl2 and an increase in Ca2+ final resting levels and recovery time.
ConclusionA novel toxicity bioassay utilizing eukaryotic cells has been developed based on filamentous fungi transformed with the recombinant aequorin gene. A range of parameters characterising changes in [Ca2+]c has been identified, e.g. Amplitude, Length of Transient, Final Resting Level and Recovery Time. These parameters can be used to determine the toxicity of a range of chemicals to eukaryotic cells in a 96-well microtitre plate method.
The widespread use and release of natural and synthetic chemicals into the environment, singly or as complex domestic and industrial effluents, has necessitated the development of rapid and cost effective toxicity tests to protect humans and other biota [1,2]. Short-term and long-term bioassays exist utilising microorganisms, invertebrates and higher plants and animals. The short-term microbial toxicity tests involve bacteria, algae, protozoa and fungi (yeasts). One of the most widely used is the Microtox® proprietary test utilising a natural light emitting marine bacterium, Vibrio fischeri. V. fischeri is a gram negative free-living luminescent bacterium [3,4] also found in some species of fish and squid within the light organs .
Bioluminescence involves the emission of visible light mediated by the luciferin-luciferase enzyme system . Microbial bioluminescence is a branch of the electron transport chain  and as electron transport is involved in cell metabolism, any disruption to this system e.g. by the presence of toxins, will have an effect on light output. Luminescence is controlled by the lux operon  within V. fischeri, which produces light at 490 nm [7,9].
Calcium is a well-known second messenger involved in the transduction of different external stimuli and hormonal signals in eukaryotic cells. A great number of studies describing changes in [Ca2+]c have been done describing the role of calcium in animal and plant cells subjected to different treatments. However, very little work in this area has been done on filamentous fungi due to the lack of both routine and reliable methods for monitoring intracellular free Ca2+ in living fungal cells.
Recently recombinant aequorin gene has been expressed in filamentous fungi . Aequorin is a Ca2+-sensitive photoprotein of the jellyfish Aequorea victoria (Mr = 21,400) . The protein consists of a single polypeptide chain, apoaequorin, a hydrophobic luminophore, coelenterazine and bound oxygen . Once Ca2+ ions are bound to the three Ca2+-binding sites in aequorin, the protein is converted into an oxygenase. The oxygenase catalyses the oxidation of the substrate coelenterazine by the bound oxygen and this results in blue light emission. The amount of luminescence emitted by aequorin is dependent upon free Ca2+ concentration and thus aequorin can be used to report cytosolic Ca2+ ([Ca2+]c). Using aequorin transformed fungi it has been shown that different physico-chemical stimuli result in a transient [Ca2+]c increases with a unique Ca2+ signature .
The general purpose of toxicity testing is to establish the potential impact of chemicals on biota in the environment. The information gained can then be used to manage the treatment or release of chemicals. Whether a substance is toxic or not depends on physico-chemical factors such as pH, temperature and salinity, but most importantly on the test organism used, the concentration of the chemical and the conditions imposed for the test (see e.g. . No single toxicity test can determine the effect of toxicants on all biota because of differences in response by organisms at different trophic levels. Eukaryotic organisms can behave differently to prokaryotes although with the V. fischeri test a high correlation has been shown with other bioassays using more complex organisms .
In this study we have tested the effect of toxic substances on the dynamics of [Ca2+]c in the fungus Aspergillus awamori, containing aequorin gene that constitutively expresses the Ca2+-binding photoprotein aequorin. Data are compared with those obtained using the V. fischeri bioluminescence assay. This represents the first study in using recombinant aequorin genes in a filamentous fungus to assess toxicity of aqueous samples.
All three toxicants tested showed a response (Table 1). Parameters assessed were rise time (characterises the time from application of stimulus to maximum amplitude of the response), amplitude (A), Length of Transient (LT50 at the point where A = 1/2Amax), final resting level (level of [Ca2+]c at the end of the experiment) and recovery time (luminescence integrated from the point when amplitude is maximal to the point when [Ca2+]c reaches its final resting level at the end of the experiment.
At low concentration, 3,5-DCP (5 min preincubation) caused a small increase in the amplitude of the [Ca2+]c response. At high concentrations (11.2 and 112 mgl-1) the phenolic inhibited the amplitude of the [Ca2+]c response at both 5 and 30 min preincubation (Figure 1a &1b; Table 1). The highest concentration of 3,5-DCP (112 mg l-1) also increased LT50 and rise time (Table 1). At all three concentrations of 3,5-DCP there were elevated final resting levels of Ca2+ and increased recovery times. The percentage increase in the final resting levels and recovery time  were used as a quantifying parameter for the analysis of the effect of the phenolic toxicant on [Ca2+]c (Table 1).
Chromium did not affect (P < 0.5) the final resting levels and recovery time of Ca2+ but had a strong dose dependant inhibition of the amplitude of the [Ca2+]c response (Figure 1c &1d). Zinc had a combination of these effects on [Ca2+]c (Figure 1e &1f). It caused a decrease in amplitude of the [Ca2+]c response as well as an increase in the final resting levels and recovery times at high concentrations (≥ 350 mg l-1) (Table 1). Both inhibition of the amplitude and the increase in the final resting levels were dose dependent with the exception of the 1300 mg l-1 Zn2+ at 30 min preincubation. The increase of the above mentioned parameters observed at this concentration was lower than when fungi were treated with 700 mg l-1 of Zn2+. This was probably due to aequorin quenching which is known to be caused by the very high concentrations of some heavy metals. At low concentration (180 mg l-1) Zn2+ caused an increase in amplitude of the [Ca2+]c response as well as an increase in the final Ca2+ resting level and recovery time.
Recovery of treated A. awamori to basal Ca2+ levels and light dissipation was fairly rapid in systems challenged with Cr6+ for 5 and 30 min. This was not the case for A. awamori treated with Zn2+ and 3,5-DCP. In these cases there was protracted recovery in Ca2+ content at higher toxicant challenges with both 5 and 30 min incubation.
IC50 is one standard parameter calculated in toxicity studies and was chosen in this study to determine differences in values obtained by the fungal and bacterial luminescence bioassays. In order to calculate IC50 values for all toxicants it was decided to utilise the amplitude of [Ca2+]c changes in the fungal cell after challenge with different concentrations of toxicant. Examples of dose response curves are presented in Figures 2, 3. Calculated IC50 values for the 5 and 30 min toxicant pre-incubations with A. awamori are presented in Table 2. The 30 min IC50 for DCP, Cr6+ and Zn2+ are 36.7, 167.8 and 549.7 mg l-1 respectively. These can be compared to values for the V. fischeri test of results of 3.6, 13.95 and 0.44 mg l-1 for the same toxicants tested over a 30 min incubation period.
In this paper data have been presented on the response of A. awamori to different toxicant concentrations by examining changes in Relative Light Units (RLU) and [Ca2+]c in the presence of an external CaCl2 concentration of 5 mM. This study differs from that of Torrecilla et al.  which examined changes in intracellular Ca2+ of the cyanobacterium Anabaena able to express apoaequorin constitutively when subjected to heat and cold shock. It is also the first study, as far as we know, examining responses of aequorin to toxicants in a filamentous fungus. The concentrations of Zn2+, Cr6+ and 3,5-DCP used in the experiments to assess toxicity were based on experience with V. fischeri bioassays, through range finding and interest in observing effects at low and high concentrations. Initially, the effect of each of these three chemicals on [Ca2+]c was examined. The [Ca2+]c response was not significantly different from that obtained with the control solution (data not shown). A second approach studied the effect of preincubation of the fungus with toxicants on [Ca2+]c response to external CaCl2.
There is no doubt that aequorin transformed A. awamori, using the protocol developed, responds to toxic chemical challenge in a reproducible way. The aequorin system has more parameters which can be assessed than other bioassays i.e. final [Ca2+]c resting level, recovery time and amplitude of [Ca2+]c/RLU following chemical challenge for 5 or 30 min.
A. awamori has been shown to respond to organic and inorganic compounds by a decrease in the amplitude of [Ca2+]c response to external CaCl2 with increasing toxicant concentration. Zn2+ and DCP also affected the final Ca2+ resting levels and recovery times. In the case of 30 min preincubation with either 112 mg l-1 DCP or 700 mg l-1 Zn2+, the final [Ca2+]c resting levels remained significantly higher than after 5 min preincubation with these toxicants indicating a greater toxicity to the fungus on longer contact with the toxicant. This is not an unusual response even in the V. fischeri bioassay where it is generally observed that toxicity increases (IC50 values decrease) with longer incubation times. IC50 values calculated using amplitude changes of [Ca2+]c showed decreased toxicity to Zn2+ at longer preincubation times. This needs further analytical consideration to determine toxicity values of relevance.
The proprietary Microtox bioassay and other bacterial bioluminescence methods, including that used in the present study, which do not involve genetically modified bacteria, utilise Vibrio (e.g. V. fischeri) and related Photobacterium species. Acute toxicity tests utilising such luminescent bacteria can underestimate the toxicity of chemicals and Backhaus et al.  showed that more reliable toxicity estimates can be obtained through the use of long-term toxicity testing with the same organisms. It may be prudent to test the response of A. awamori using longer preincubation times with toxicants e.g. > 24 h, prior to monitoring Ca2+ homeostasis. This may increase the sensitivity of the bioassay. It must be remembered however that for one of the toxicants (Zn2+), a decrease in sensitivity was evident at 30 min compared to the result at 5 min. There was also evidence of toxicity recovery through adaptation with increased incubation. This may be due to acquired resistance by the organism through synthesis of metal-binding proteins (metallothioneins) or constituents in the growth medium removing/immobilising the metal (e.g. EDTA, phosphate precipitation). This needs to be examined in the fungal bioassay.
It is interesting to compare toxicity data obtained with A. awamori with those obtained with the V. fischeri bioassay. The toxicity values for the fungus are higher than those of the bacterial test indicating lower bioassay sensitivity with the parameter used to calculate the IC50 values. For example, the IC50 values for the 30 min Zn2+ incubations were approximately 3 orders of magnitude lower for V. fischeri. Such insensitivity to Zn2+ has been observed with an ATP luminescence assay . The IC50 results with Cr6+ (30 min preincubation) were 400 mg l-1, 12 times higher than in the bacterial biosensor. This value is the same order of magnitude as the 15 min Microtox assay (339.6 mg l-1) carried out by Codina et al. . Indeed, the use of V. fischeri in various proprietary tests (LumisTox, Microtox, ToxAlert etc) have been shown to exhibit differences in sensitivity to different toxicants . It is, therefore, difficult to categorically state that V. fischeri is more sensitive to Cr6+ than A. awamori particularly when different incubation periods are used in bioassays affecting any ultimate IC50 value. It should be also noted that since the aequorin test is based on changes in [Ca2+]c, toxic chemicals often exert an increase in [Ca2+]c thus affecting IC50 calculations. The calculation of IC50 for this fungal bioassay may not be appropriate. Other parameters such as LT50, rise time, final Ca2+ resting levels and recovery time would provide ideal candidate parameters, but more tests and comparisons with other bioassays are needed. The aequorin bioassay can also generate up to 15 parameters to assess the effect of toxicants due to the complex pattern of [Ca2+]c changes . These parameters can be further used to create a profile for toxicants with specific modes of action . With different parameters available for analysis in the aequorin test it could be useful to assess the toxicity by calculating the NOEC (no observable effect concentration) or a nominal IC10 value .
Codina et al.  also used a yeast bioassay to test metal toxicity. The eukaryotic yeast was found to be less sensitive to metals than prokaryotic organisms including Vibrio and Pseudomonas species. An IC50 value of 549.1 mg l-1 was obtained for Zn2+ using the yeast assay  which is comparable to some of the values obtained with A. awamori in our study. The yeast was slightly more sensitive to Cr6+ (30.9 mg l-1) than the filamentous A awamori but this is not unusual among members of the same trophic level (see . Recent chronic toxicity studies have been using wild-type and genetically modified mutants of the yeast Saccharomyces cerevisiae . EC50 values of >1000 mg l-1 were determined for Zn2+ and 1.7-4.79 mg l-1 for Cr6+ indicating variability in assays that rely on conditions imposed including exposure time, species tested and criteria used in the final assessment.
An interesting observation is the enhanced stimulation of light output in some systems with a low concentration of toxicant. This is seen in the 5 min treated systems using 0.11 mg l-1 DCP (Figure 1a), 180 mg l-1 Zn2+ (Figure 1e) and also in the 30 min treated system with 180 mg l-1 Zn2+ (Figure 1f). This stimulation, referred to as hormesis, is a common occurrence in toxicity bioassays  and is often observed in our laboratory using the V. fischeri bioassay.
It is not clear based on these preliminary observations what causes Ca2+ and light retention. In the case of DCP it may be that this polar narcotic is affecting membrane permeability and the transport of Ca2+ out of the cytosol (Ca2+ ATPase and efflux of Ca2+ via e.g. Ca2+/H+ antiporters) and hence, a delay in RLU dissipation. The metals may be competing with the transport mechanisms in membranes. The metals thus act by interacting with physiological ions affecting transport and its concomitant effect on light output.
Most of the organic chemicals discharged to the environment exert a narcotic effect on biota. This is either Type I (non-polar narcosis) or Type II (polar narcosis). It would be interesting to utilise A. awamori to test whether non-polar and polar narcoses operate in the fungus and whether these can be predicted by QSAR (Quantitative Structure Activity Relationships). Cronin and Schulz  showed, using QSAR, that non-polar narcosis occurs in V. fischeri but they could not validate polar narcosis in the organism.
There is no doubt that a comprehensive testing of metals and organic compounds needs to be carried out to assess the value of A. awamori as a toxicity sensing tool both in systems using pure chemicals and those involving real samples (e.g. complex effluents and soil water matrices). Toxicant preincubation time and effect on fungus response would be an important factor to test fully.
The current paper presents the proof-of-concept study of the novel toxicity bioassay based on using filamentous fungi transformed with the recombinant aequorin gene. The research conducted has shown that the recombinant aequorin method can be used as a novel eukaryotic toxicant biosensor. It offers more parameters which can be readily analysed than the traditionally used bacterial biosensors. The fungal aequorin biosensor responded to toxic substances (3,5-DCP, Zn2+ and Cr6+) by a decrease in the amplitude of the [Ca2+]c response to 5 mM CaCl2 and an increase in the [Ca2+]c resting levels (Zn2+ and 3,5-DCP). Preliminary IC50 values obtained with the fungal aequorin system, and based on the inhibition of the [Ca2+]c amplitude in response to external CaCl2 treatment, indicate that it is less sensitive for detecting 3,5-DCP, Zn2+ and Cr6+ than the V. fischeri luciferase system. However, it is obvious that the changes in amplitude is not the most suitable parameter for calculating IC50 and more research are needed to determine the best possible set of parameters to be used together with the aequorin bioassay.
ChemicalsUnless otherwise stated all the chemicals used were from Calbiochem-Novabiochem (UK) Ltd. (Nottingham, UK) or Sigma (Dorset, UK).
Organisms and mediaExperiments were carried out with the strain of A. awamori 66A, which has been transformed with the recombinant aequorin gene . All media and salt solutions were made up in distilled H2O and sterilised by autoclaving at 121°C at 15 psi for 20 min prior to use. A. awamori cultures were grown in liquid Vogel's medium with 1% sucrose (VS medium ).
A method of growing A. awamori cultures for in vivo luminometry was employed utilising static liquid culture in 96-well plates. Twelve ml of sterile VS medium was inoculated with 1 × 105 spores per ml. Coelenterazine (Biosynth AG, Staad, Switzerland) was dissolved in methanol (MeOH) to a final concentration of 2.5 μM. The final MeOH concentration was not more than 0.1%, which has been shown not to affect spore germination or hyphal growth. Using a 12-channel pipette (Anachem, Luton, UK), 100 μl of the inoculated medium was added to each well, and the plate covered with a microplate lid (Labsystems, Helsinki, Finland). Cultures were incubated in a humidity chamber in the presence of free water at 30°C for 24 h.
Luminometry was performed using an EG & G Berthold (Bad Wildbad, Germany) LB96P Microlumat luminometer. The luminometer was designed to measure luminescence using the flat-bottomed 96-well microtitre plates from EG&G Berthold or Dynex Technologies Inc. (Chantily, UK). Two 100 μl built-in injectors allowed stimulation of samples.
The luminometer measures light emission in relative lights units (RLU). To convert RLU into [Ca2+]c concentrations the following empirically derived equation was used:
pCa = 0.332588 (-log k)+5.5593,
where k = luminescence counts s-1/ total luminescence counts .
Total luminescence is measured as an integral of all luminescence up to complete aequorin discharge. Aequorin was discharged by adding 2M CaCl2 in 20% ethanol to the wells. Ethanol was used as a permeabilising agent. Conversion of RLU into [Ca2+]c concentration was made using a Macro developed in Excel 7.0 by Mark Knight (University of Oxford).
Three toxicants were tested: 3,5-DCP, ZnSO4 and K2Cr2O7. All toxicants were added 5 min and 30 min before treatment with 5 mM external CaCl2 in a total volume of 25 μl VS medium. 4-6 replicates were performed for each treatment. All the experiments were performed in triplicate. IC50 values were calculated only for the amplitude of the response.
Vibrio fischeri bioassays utilised cultures of the organism grown in Photobacterium Broth (PB) at 37°C until optimum light output. A 100 μl volume of V. fischeri suspension was added to each of the 96 wells in a microtitre plate. During the experiment a 100 μl volume of NaCl solution (giving a final concentration of 2% NaCl in the test) containing the test substance in the appropriate concentration was added to the wells. For each measurement a control consisting of 6 wells with V. fischeri to which the NaCl solution was added. Chemicals were tested in five different concentrations and each concentration was tested in three replicates. Plates were measured in an Anthos Lucy 1 luminometer. Measurements were made over a period of 30 min. IC50 values were calculated for 5 and 30 min incubations. Recording of data started immediately after addition of the test solutions to the wells containing the culture. The standard proprietary Microtox bioassay was also carried out .
OK conceived the study, designed and developed aequorin bioassay, carried out the tests and has been involved in the writing of the article.
MZ has designed the microbial part of the testing and participated in carrying out the fungal tests.
NC helped design the study and participated in writing of the article.
All authors read and approved the final manuscript.
We are grateful to Dr Mark Knight, Department of Plant Science, University of Oxford for the Excel 7.0 spreadsheet used to convert RLU to [Ca2+]c concentrations, University of Edinburgh for providing aequorin transformed fungi and to Darwin Trust for providing funding for Olga Kozlova.